Do you need a gas compliance certificate to sell or rent your home in Perth?
By Julian Fischer · Updated 2026-07-28
If you’re getting ready to sell or lease out a Perth property with gas appliances, the compliance certificate for any gas work is one of those documents that’s easy to overlook until someone asks for it, usually at the worst possible time.
What the certificate actually proves
In WA the paperwork people call a gas compliance certificate is a Notice of Completion. After gasfitting work other than servicing, the licensed gas fitter must give the customer a Notice of Completion within 48 hours and send a copy to the gas supplier, certifying that the work complies with the Gas Standards Regulations and is safe to use. It is not a general safety inspection of the whole house; it documents that a piece of gas work, such as a new appliance connection or a gas point installation, was carried out by someone licensed to do it.
Why it matters when selling
Selling a WA home does not legally require a gas certificate or Notice of Completion. The safety items WA law does tie to a sale or lease are compliant smoke alarms and, for leases, two RCDs. Buyers and their building inspectors may still ask whether gas work was done by a licensed fitter, so it helps to have any Notice of Completion on hand. Unauthorised gasfitting work is a bigger issue, because insurance claims may be refused where it has occurred. A buyer may ask for an inspection by a licensed gas fitter as a condition of the contract, but the law does not require one before settlement.
Why it matters for rentals
WA law does not require a gas certificate to rent out a home, but Building and Energy recommends an inspection by a licensed gas fitter before a tenancy starts. If a tenant reports a suspected gas issue and it turns out the underlying installation was never properly certified, that becomes a liability question for the landlord, not the tenant. Keeping compliance paperwork on file for any gas work done during your ownership protects you if a dispute or an insurance claim ever comes up.

What to do if you’re missing paperwork
- Check with the gas fitter or company who did the original work, since many keep records beyond what’s given to the customer at the time.
- If that’s a dead end, arrange for a currently licensed gas fitter to inspect the installation.
- If it passes, keep the fitter’s report with your home records.
- If it doesn’t pass, get a written quote for the remedial work needed before you list the property or advertise the rental.
| Situation | What to check | Who to involve |
|---|---|---|
| Selling with existing gas work | Locate any Notices of Completion for gas fitting done | Original gas fitter or a licensed inspector |
| No certificate on file | Arrange an inspection by a licensed gas fitter | Licensed gas fitter |
| New tenancy starting | Confirm gas installations are certified and safe | Property owner, licensed gas fitter |
| Gas work found uncertified | Get it inspected before proceeding | Licensed gas fitter |
What re-inspection and certification typically costs
If you need an existing installation inspected and re-certified, the cost is generally in line with a standard gas fitter callout, since the visit involves checking the installation, testing for leaks, and confirming it meets current standards, rather than any major remedial work. If the inspection uncovers a genuine fault or non-compliant work, the cost rises to cover whatever repair or reinstallation is needed to bring it up to standard. Either way, it’s a worthwhile expense to budget for early in a sale or lease-up timeline rather than discovering the need for it during a final walkthrough.
This is general information about how gas compliance certification typically works in WA, not legal advice for your specific sale, purchase or tenancy. For questions about your particular obligations as a buyer, seller, landlord or tenant, speak with your conveyancer, property manager or a solicitor.
To find a licensed gas fitter who can inspect or certify an installation, our gas fitting category ranks Perth operators using our published scoring methodology. You can also browse the full Perth plumbing directory for related trades if your sale or lease-up touches more than gas.
Sources
Checked on 20 October 2026. The facts on this page rest on these official pages.
- Building and Energy: having gasfitting work done (fact sheet)
- Gas Standards (Gasfitting and Consumer Gas Installations) Regulations 1999
- Building and Energy: electrical and gas safety when renting or hiring (fact sheet)
- Consumer Protection WA: rental home safety
- Building and Energy: using Gas eNotice
Frequently asked questions
- What if I can't find the gas compliance certificate for work done years ago?
- If the paperwork has been lost, a licensed gas fitter can inspect the existing installation and, if it meets current standards, issue fresh certification. It's worth doing this well before settlement or a new tenancy starts rather than scrambling at the last minute.
- Does every gas appliance in the house need its own certificate?
- Certification covers the installation work performed, not each individual appliance in isolation. Any new connection, alteration or repair to gas fittings should have its own compliance record from the licensed gas fitter who did the work.
- Who is responsible for gas compliance in a rental property, landlord or tenant?
- The property owner is generally responsible for ensuring gas installations are safe and compliant, since it's their asset and their legal obligation as landlord. Tenants should report any suspected gas issues promptly rather than attempting to investigate or fix them.
- Can a real estate agent ask to see gas compliance paperwork?
- Yes, and it's reasonable for them to. Having certificates on hand for any gas work done on the property speeds up both a sale and a new lease, and avoids awkward questions during due diligence.