What is a gully trap?
In Western Australia the outdoor fitting is called an overflow relief gully (ORG): a grated drain outside the home, usually near a bathroom or laundry, that releases wastewater outside and away from the building if the sewer blocks or overflows.
Found at ground level outside most Perth homes, an overflow relief gully sits in a pit with a water seal (the trap) that holds standing water and stops sewer gases and rodents coming back up the drain. It is not where the household pipes join the public sewer: the property sewer runs from the inspection shaft to Water Corporation's connection just past the lot boundary.
Its main job is overflow relief. If the property sewer or Water Corporation's main blocks, the gully is designed to let wastewater escape outside and away from the home instead of backing up into bathrooms, kitchens and laundries. For that reason the gully should stay clear and sit above the surrounding ground level so rain cannot run into it.
Over time, gully traps collect sediment, grease, and debris that settle in the base of the pit. This accumulation can reduce flow capacity and eventually cause blockages. Leaves, food scraps, soap buildup, and mineral deposits are common culprits. When a gully trap blocks, water pools around the pit or drains slowly from outdoor areas. Tree roots can also infiltrate the pit and trap connections.
Regular inspection and cleaning of the gully trap prevents blockages and keeps the overflow mechanism functioning. If your gully trap is slow to drain or overflowing, a plumber can clean it or identify whether the blockage sits deeper in the sewer line. Drain blockage specialists routinely clear trapped sediment and restore proper flow.