Perth Plumbers Hub
Menu

What is an air admittance valve?

An air admittance valve is a one-way vent device that allows air into a plumbing drain system without requiring a full roof vent stack, opening when pressure drops and closing when pressure returns to normal.

An air admittance valve (AAV) is a spring-loaded, one-way vent that sits inside your plumbing system's drain pipes. When water drains quickly, it creates negative pressure (a partial vacuum). The valve automatically opens to admit air, equalising that pressure so your drains flow properly without gurgling or siphoning. Once the pressure returns to normal, the valve spring closes, sealing the system again.

The main advantage is practicality. Full roof vent stacks require penetrating your roof, running pipe through walls, and weatherproofing the penetration. An AAV mounts vertically on a drain line under a sink, behind a toilet, or in a wall cavity, and needs only a small connection to the drain branch. This makes it popular for renovations, additions, or homes where running traditional venting is difficult.

In WA, air admittance valves are permitted when they meet Building and Energy's technical note on AAVs. For trap vents and group vents the valve must be no more than 1,000 mm below the flood level of the lowest fixture it serves, with at least a 100 mm air cushion above the graded pipe, and it must be installed upright and be accessible for repair or replacement. The note is under review, so ask your plumber to confirm the current requirements. AAVs work best on individual fixture branches or small vent loops rather than entire large drain networks.

The valve eventually wears out and needs replacement, usually after 10-15 years. Many plumbers in Perth stock and install them as part of standard drain work, particularly for renovations or new kitchen and bathroom installations.

Related on this site